- （+86）15566279606
- info@dhlathe.com
·FANUC 0i-MF PLUS(5) system equipped with 10.4″ color LCD display
·High-strength cast iron bed
·Spindle directly connected to spindle motor via high-torque flexible coupling (maximum speed 12000rpm)
·Rigid tapping
·24-tool manipulator tool magazine
·Rolling guideways (X – 45mm, Y – 45mm, Z – 45mm)
·Servo motor directly connected to extra-large, double pre-tensioned ball screws (X – φ40mm, Y – φ40mm, Z – φ40mm)
·Faster rapid traverse speed (X – 36m/min, Y – 36m/min, Z – 30m/min)
·Accuracy (Positioning accuracy: 0.019/0.008/0.008; Repeat positioning accuracy: 0.008/0.005/0.005)
·FANUC 0i-MF PLUS (5) CNC System
·24-tool Arm-type Tool Magazine
·12000rpm Direct-coupled Spindle + Spindle Oil Cooling Unit
·Integral Shroud Inner Sliding Door
·Screw Chip Conveyor and Chip Accumulator When chips are too long, the user shall perform chip breaking operation to keep the length less than 100mm
·Automatic Lubrication System
·Tools & Toolbox
·In-machine Working Light
·Machine Tool Three-color Warning Light
·Electrical Cabinet Heat Exchanger
·Spindle Air Curtain Dust-proof System
·Spindle Taper Hole Air Blowing Device
·Rigid Tapping
·Workpiece Cooling System
·USB Interface and DNC Function
·Embedded Ethernet (RJ45) Interface
·Door-opening Protection Device (Protective Door)
·Portable Handheld Unit
·Portable Chip Blowing Air Gun For cleaning worktable and workpieces
·Simple Oil-water Separator
·Foundation Installation Accessories
·Random Technical Documents
