- （+86）15566279606
- info@dhlathe.com
·FANUC 0i-MF PLUS(1) system equipped with 10.4″ color LCD display
·High-strength cast iron bed
·BT40 spindle directly connected to spindle motor via high-torque flexible coupling (maximum speed 12000rpm)
·BT50 spindle driven by high-torque toothed belt (maximum speed 6000rpm)
·Rigid tapping
·24-tool manipulator tool magazine
·BT40 spindle — 3-axis linear rolling guideways (X – 45mm, Y – 45mm, Z – 45mm)
·BT50 spindle — Two linear + one hard guideway (X – 45mm, Y – 45mm, Z – 120mm)
·Servo motor directly connected to double pre-tensioned ball screw (X: φ40×·12mm; Y: φ40×12mm; Z: φ40×12mm)
·BT40 spindle — 3-axis linear guideway rapid traverse speed (X: 36m/min, Y: 36m/min, Z: 30m/min)
·BT50 spindle — Two linear + one hard guideway rapid traverse speed (X: 24m/min, Y: 24m/min, Z: 20m/min)
·FANUC 0i-MF PLUS (1) CNC control system
·24 tool arm magazine（BT40）
·12000rpm direct coupled spindle + spindle oil cooling unit
·Integral Shroud （sliding door）
·Screw chip conveyor and chip accumulator（When the chip is too long, the user increases the chip breaking operation, the length is less than 100mm.）
·Automatic lubrication system
·Tools & Toolboxes
·In-machine working light
·Three-color warning light for machine tools
·Electrical box heat exchanger
·Spindle air curtain dust protection system
·Spindle taper hole blowing device
·Rigid tapping
·Workpiece cooling system
·USB interface and DNC function
·Embedded Ethernet (RJ45) interface
·Door-opening protection (guards)
·Portable handheld units
·Portable chip blowing air gun（For cleaning the table and workpieces）
·Simple oil-water separator
·Foundation mounting accessories
·Randomized technical information
